What weldmesh apertures do you stock?

Gal weldmesh sheets from 25×25×2.5mm up to 100×100×5.0mm — see the size table for the full stocked list. All sheets are 1200 × 2400mm.

Do you stock walkway mesh?

Yes — heavy-duty galvanised walkway mesh in 600, 750, 900 and 1200mm widths, all 3000mm long. Suits platforms, treads, ramps and industrial walkways.

Do you cut weldmesh or walkway mesh to size?

Yes — bandsaw or plasma cuts on request. Send the finished panel size and we'll have it ready.

Do you deliver weldmesh and walkway mesh across the Gold Coast and Northern NSW?

Yes — weldmesh sheets and walkway mesh delivered across the Gold Coast, Tweed Heads and Northern NSW, on the truck or crane truck.

What walkway mesh widths do you stock?

Heavy-duty galvanised walkway mesh in 600, 750, 900 and 1200mm widths, all 3000mm long — for platforms, treads, ramps and industrial walkways.

What weldmesh apertures do you stock?

A range of galvanised weldmesh apertures from 25×25×2.5mm to 100×100×5.0mm — all in 1200 × 2400mm sheets. Ring the yard for what's on the rack today.

How much do weldmesh and walkway mesh cost?

Price depends on aperture, wire diameter, width and quantity. Send the take-off and we'll quote same day.

PRODUCTS / Weldmesh & Walkway Mesh

Weldmesh & Walkway Mesh

Galvanised weldmesh sheets and heavy-duty walkway mesh, in the sizes trades on the Gold Coast, Tweed Heads and Northern NSW actually buy. Fabrication infill, fencing panels, slab reinforcement, industrial walkways, platforms, ramps and stair treads.

Weldmesh

1200 × 2400mm sheets

Walkway mesh

600–1200mm × 3000mm

Finish

Galvanised

Pickup or delivery

Both

Weldmesh sheets are all 1200 × 2400mm, in a range of apertures and wire diameters from a fine 25×25×2.5mm through to a heavy 100×100×5.0mm. Walkway Mesh is stocked in four widths (600, 750, 900 and 1200mm), all 3000mm long.

Range only on this page — for what's on the rack today, give the yard a ring.

Common applications

What it's used for.

Fabrication infill panels
Fencing panels
Slab and concrete reinforcement
Site security fencing
Garden and yard divisions
Trellis and climbing-plant support
Industrial walkways and platform treads
Ramps and stair treads

Sizes we carry

Standard Weldmesh & Walkway Mesh sizes — pulled straight from the rack.

marks the sizes we move most often. Other sizes available on request.

See full size reference → for every standard section we stock.

Stock varies by size. Call us before you drive to confirm what's on the shelf today.

Galvanised Weldmesh — all sheets 1200 × 2400mm.

Marshall Steel — Weldmesh & Walkway Mesh

Galvanised Weldmesh — all sheets 1200 × 2400mm. · 9 Stevenson Court, Burleigh Heads QLD · 07 5576 6037

Aperture × Wire (mm)	Sheet size	Finish
25 × 25 × 2.5	1200 × 2400	Galv
25 × 25 × 3.15	1200 × 2400	Galv
50 × 50 × 3.15	1200 × 2400	Galv
50 × 50 × 4.0	1200 × 2400	Galv
75 × 50 × 4.0	1200 × 2400	Galv
75 × 75 × 5.0	1200 × 2400	Galv
100 × 100 × 5.0	1200 × 2400	Galv

Got your size? Get a quote.

Quote my Weldmesh & Walkway Mesh

Walkway Mesh — all sheets 3000mm long. Available in a range of widths.

Marshall Steel — Weldmesh & Walkway Mesh

Walkway Mesh — all sheets 3000mm long. Available in a range of widths. · 9 Stevenson Court, Burleigh Heads QLD · 07 5576 6037

Width × Length (mm)	Finish	Typical use
600 × 3000	Galv	Narrow catwalks, stair treads
750 × 3000	Galv	Access walkways
900 × 3000	Galv	Standard platform
1200 × 3000	Galv	Wide platform / mezzanine

Got your size? Get a quote.

Quote my Weldmesh & Walkway Mesh

Yellow-dot sizes are typical stock at the Burleigh Heads yard. Other sizes available on request — usually same-week.

Finishes

How we finish it.

Both weldmesh and walkway mesh are galvanised as standard — built to live outside and take weather.

Galvanised weldmesh sheets
Galvanised walkway mesh

Galvanising to AS/NZS 4680.

Cut to length & fabricated on site.

We cut Weldmesh & Walkway Mesh to your sizes on the bandsaw and fabricate from this range in the workshop — drilling, coping, welding, hole-punching. See the fabrication service →

FAQ

Common questions on Weldmesh & Walkway Mesh.

What weldmesh apertures do you stock?: Gal weldmesh sheets from 25×25×2.5mm up to 100×100×5.0mm — see the size table for the full stocked list. All sheets are 1200 × 2400mm.
Do you stock walkway mesh?: Yes — heavy-duty galvanised walkway mesh in 600, 750, 900 and 1200mm widths, all 3000mm long. Suits platforms, treads, ramps and industrial walkways.
Do you cut weldmesh or walkway mesh to size?: Yes — bandsaw or plasma cuts on request. Send the finished panel size and we'll have it ready.
Do you deliver weldmesh and walkway mesh across the Gold Coast and Northern NSW?: Yes — weldmesh sheets and walkway mesh delivered across the Gold Coast, Tweed Heads and Northern NSW, on the truck or crane truck.
What walkway mesh widths do you stock?: Heavy-duty galvanised walkway mesh in 600, 750, 900 and 1200mm widths, all 3000mm long — for platforms, treads, ramps and industrial walkways.
What weldmesh apertures do you stock?: A range of galvanised weldmesh apertures from 25×25×2.5mm to 100×100×5.0mm — all in 1200 × 2400mm sheets. Ring the yard for what's on the rack today.
How much do weldmesh and walkway mesh cost?: Price depends on aperture, wire diameter, width and quantity. Send the take-off and we'll quote same day.